Ugrapitha 6x6

The Ugrapitha mandala

Ugrapitha extends the even-grid line of Pechaka and Mahapitha to six divisions a side. Twenty padas form the outer ring, twelve the middle ring, and the central four stand together as the Brahma block. The grid is fine enough to separate rooms on a modest plan, yet every cell is still large enough to mean something on site.

The grid and its centre

Over your plan at your north angle, the tool draws the thirty-six padas, shades the central block, and reads any tapped point by pada, ring and direction. As on every even grid, the result is explicit that Brahma here is the recorded central two-by-two — a block, not a cell — and the classical basis for the layout is quoted with the reading.

How practitioners use this

Practitioners bring out Ugrapitha for plans that split naturally into six bays — duplex fronts, commercial floors, deep row plots — and for briefs where two distinct rings of use surround a protected middle: service at the edge, living in the middle band, the centre kept open. The ring-and-block readings drop straight into the client report.

Frequently asked questions

How does Ugrapitha differ from Mahapitha?

Both are even grids with a central block, but six-by-six adds a second full ring — the middle band that four-by-four lacks.

Is the Brahma block bigger here?

It is the same two-by-two count of padas, but each pada is smaller, so the block covers less of the plan — the reading gives exact cells.

When is six-by-six the right resolution?

When rooms must be told apart but deity-level detail is not needed; it sits midway between the coarse and the fine grids.

Free to read, licensed to run

This page is open to every reader in English and Hindi, so the Ugrapitha mandala can be studied freely. The interactive calculator — which lays the grid over your own plan at your north angle and reads any point you tap — runs with the Practitioner licence.